page 1 www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 speci? cations and availability subject to change without notic e. dimensions shown in mm. dimensions are shown for reference purp oses only. rohs compliant j120d 30.0 x 15.5 x 23.3 (33.0) mm features e197851 general data* dc coil data* contact data* ? switching capacity up to 20a ? pc pins and quick connect terminals ? strong resistance to shock and vibration ? designed to withstand high inrush ? uses include household appliances contact arrangement 1a = spst n.o. contact rating 20a @ 250vac general purpose contact resistance < 50 milliohms initial contact material agsno 2 maximum switching power 5000va maximum switching voltage 300vac maximum switching current 20a electrical life @ rated load 100k cycles, average mechanical life 10m cycles, average insulation resistance 100m min. @ 500vdc initial dielectric strength, coil to contact 4500v rms min. @ sea level initial contact to contact 1500v rms min. @ sea level initial shock resistance 200m/s 2 for 11 ms vibration resistance 1.50mm double amplitude 10~40hz terminal (copper alloy) strength 10n operating temperature -30 o c to +55 o c storage temperature -40 o c to +85 o c solderability 260 o c for 5 s weight 23g * values can change due to the switching frequency, desired reli- ability levels, environmental conditions and in-rush load levels. it is recommended to test actual load conditions for the application. it is the user?s responsibility to determine the performance suitability for their speci c application. the use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. coil voltage vdc coil resistance +/- 10% pick up voltage vdc (max) 75% of rated voltage release voltage vdc (min) 10% of rated voltage coil power w operate time ms release time ms rated max .9w 5 6.5 28 3.75 .50 .9 20 10 6 7.8 40 4.50 .60 12 15.6 160 9.00 1.2 24 31.2 640 18.00 2.4 48 62.4 4267 36.00 3.6 ft
www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 speci? cations and availability subject to change without notic e. dimensions shown in mm. dimensions are shown for reference purp oses only. j120d page 2 dimensions units = mm bottom views schematics & pc layouts 2x 6.35 [.25] 2x .80 [.032] 6.40 [.25] 18.50 [.73] 10.00 [.39] 8.00 [.31] 15.80 [.62] 23.30 [.92] 3.50 typ [.14] 2x .90 [.04] 13.80 [.54] 12.00 [.47] 10.00 [.39] 13.80 [.54] 12.00 [.47] 2x .40 [.02] 1.50 typ [.06] 30.10 [1.19] 9.40 [.37] 15.80 [.62] 26.20 [1.03] 23.30 [.92] 12.00 [.47] 10.00 [.39] 13.80 [.54] 13.80 [.54] 12.00 [.47] 2x .40 [.02] 2x .90 [.04] 1.50 typ [.06] 3.50 typ [.14] quick connect terminals and pc pins pc pins only 1 2 3 4 27.60 [1.09] 22.00 [.87] 12.00 [.47] 3.80 [.15] 4x ? 1.80 [.07] ordering information 1. series j120d 1a s 12vdc j120d 2. contact arrangement 1a = spst n.o. 3. sealing options s = sealed available with pc pins only c = dust cover available with quick connect & pc pins version only 4. coil voltage 5vdc 6vdc 12vdc 24vdc 48vdc 5. terminal options blank = quick connect & pc pin p = pc pin only
|
